Aluminum alloy CNC machining has great advantages over manual machining. For example, the aluminum alloy parts produced by CNC machining are very accurate and repeatable; aluminum alloy CNC machining can produce parts with complex shapes that cannot be manually processed. So how much do you know about the operating principles of aluminum alloy CNC machining? Learn together.

1. The use environment of CNC equipment.
In order to improve the service life of CNC equipment, it is generally required to avoid direct sunlight and other thermal radiation, and to avoid places that are too humid, dusty, or corrosive. Precision CNC equipment should be kept away from equipment with large vibration, such as punching and forging equipment.
CNC precision machining

CNC machining aluminum parts

2, a good power supply guarantee.
In order to avoid the impact of large power fluctuations (greater than ± 10%) and possible transient interference signals, CNC machining equipment is generally powered by dedicated lines (such as separate from the low-voltage distribution room for CNC machine tools) or additional voltage stabilizer , Can reduce the impact of power supply quality and electrical interference.

3. Formulate effective operating procedures.
In terms of the use and management of CNC machine tools, a series of practical and effective operating procedures should be formulated. For example, lubrication, maintenance, reasonable use and standardized handover system are the main contents of the use and management of CNC equipment. It is one of the important measures to ensure the safe operation of CNC machine tools to formulate and abide by aluminum alloy cnc machining operation regulations. Practice has proved that many failures can be reduced by following the operating procedures.
As we all know, correct operation and maintenance are one of the key factors for the correct use of aluminum alloy cnc processing equipment. Using the correct operation can prevent abnormal wear of the machine tool and avoid unexpected failures; daily maintenance, the equipment maintains a good technical state, delay Deterioration process, discover and eliminate hidden troubles in time, and ensure safe operation all the time. The daily use requirements for precision parts processing enterprises using aluminum alloy cnc processing are as follows:
1. After starting up, it must be preheated for about 10 minutes before processing; machines that are not used for a long time should extend the preheating time;
2. Check whether the oil circuit is smooth;
3. Place the worktable and saddle in the center of the machine before turning off (moving the three-axis travel to the middle of the travel of each axis);
4. The machine tool should be kept dry and clean.
Aluminum alloy CNC machining equipment is relatively expensive, so correct operation and maintenance can prevent abnormal wear of the machine tool and prevent sudden machine tool failure. Careful maintenance of aluminum alloy CNC machining can maintain the long-term stability of machine tool processing accuracy and extend the service life of machine tools.

Leave a Reply