Characteristics and parameters of ABS material (3D printing)

Parameters:

Material name: ABS
Printing temperature: 220-240°
Material density: 1.04±0.2g/cm3
Water absorption: 1%
Tensile strength: ≥43MPa
Elongation at break: ≥10.0%
Bubble: no bubbles

Characteristic:

1: High strength-stronger than PLA, impact resistance, heat resistance, chemical resistance, and difficult to degrade, more suitable for manufacturing

2: High precision-the wire diameter tolerance is controlled within 0.02mm, which is beneficial to the printing effect

3: Good quality-good tensile strength, ductility, good fluidity, very low shrinkage, high toughness, low weight

More products: 3dprinting plastic

Aixi Rapid Shop