English
Deutsch
Français
日本語
Is Aluminum A Common Prototyping Material? If you’re a product designer, you’re probably wondering, «Is aluminum a common prototyping material?» If so, you’re not alone! Aluminum is often used for prototype manufacturing due to its outstanding qualities, including corrosion resistance and strength. This makes it a highly suitable choice for various projects, from pre-production prototypes…
Archivos de Categoría: Conocimiento de los materiales
29
Dic
Dic
45 steel 45 steel is the name in GB, also called «oil steel», this steel has higher strength and better machinability. Material advantages: It has high strength and good machinability. After proper heat treatment, a certain degree of toughness, plasticity and wear resistance can be obtained. The material source is convenient. It is suitable for…
04
Ago
Ago
1. When stainless steel is processed, the workpiece and the tool generate high heat, and the tool is easy to wear. Therefore, there are certain requirements for the knife, which must be wear-resistant and high-temperature resistant. At the same time, make the cutting edge sharp and choose a reasonable angle. 2. The speed is slow,…
15
Jul
Jul
Below is technical data sheet POM / Derlin , if you want complete data ,welcome contact us . I. Physical Properties Test method Unit Value 1. Specific gravity (r) ISO 1183 g/cm³ 1,39 2. Water absorption ISO 62 % 0,2 3. Maximum permissible service temp • • • (no stronger mechanical stress involved) …
15
Sep
Sep
In recent years, PP fiber reinforced materials have developed rapidly in the modified plastics industry, and most of the glass fiber reinforced materials used in the automotive field are PP substrates. With the improvement of plastic modification technology and the needs of the development of the automotive industry, the development trend of long glass fiber…
04
Sep
Sep
(Polycarbonate) Specific gravity: 1.18-1.20 g/cm3 Molding shrinkage: 0.5-0.8% Molding temperature: 230-320℃ Drying conditions: 110-120℃ 8 hours Material performance High impact strength, good dimensional stability, colorless and transparent, good colorability, electrical insulation, corrosion resistance, wear resistance, but poor self-lubricity, stress cracking tendency, easy to hydrolyze at high temperature, poor compatibility with other resins . Suitable for…
02
Sep
Sep
(Polyamide) Specific gravity A6-1.14g/cm3 PA66-1.15g/cm3 PA1010-1.05g/cm3 Molding shrinkage rate A6-0.8-2.5% PA66-1.5-2.2% Molding temperature: 220-300℃ Drying conditions: 100-110℃ for 12 hours Material performance Tough, abrasion-resistant, oil-resistant, water-resistant, anti-enzyme bacteria, but high water absorption. Nylon 6 has good elasticity, high impact strength, and greater water absorption. Nylon 66 has better performance than nylon 6, high strength and…
02
Sep
Sep
(Polyethylene) Specific gravity: 0.94-0.96 g/cm3 Mold shrinkage: 1.5-3.6% Molding temperature: 140-220℃ Material performance Corrosion resistance, excellent electrical insulation (especially high-frequency insulation), can be chlorinated, modified by irradiation, and can be reinforced with glass fiber. Low pressure polyethylene has a melting point, rigidity, hardness and strength, low water absorption, and good The electrical properties and radiation…
01
Sep
Sep
(Polypropylene) Specific gravity: 0.9-0.91 g/cm3 Mold shrinkage: 1.0-2.5% Molding temperature: 160-220℃ Material performance Low density, strength and rigidity, hardness and heat resistance are better than low-pressure polyethylene, and can be used at about 100 degrees. It has good electrical properties and high-frequency insulation. It is not affected by humidity, but it becomes brittle at low…
25
Ago
Ago
(Polyoxymethylene) Specific gravity: 1.41-1.43 g/cm3 Mold shrinkage: 1.2-3.0% Molding temperature: 170-200℃ Drying conditions: 80-90℃ 2 hours Material performance It has good overall performance, high strength and rigidity, good wear resistance, low water absorption, good dimensional stability, but poor thermal stability, easy to burn, and easy to age when exposed to the atmosphere. Suitable for making…